Shure Axient AD610

Popis

The AD610 ShowLink Wireless Access Point from Shure enables real-time remote control of all ShowLink-enabled Axient transmitters, including both ADX and AXT series models. The access point allows comprehensive management of transmitter parameters from the receiver or Wireless Workbench using 2.4 GHz (IEEE 802.15.4) wireless communication. All parameter changes occur without interruption to the performer.

Multiple access points can extend the operational range or increase the number of transmitters supported on the ShowLink network. The access point features true diversity antenna inputs along with mounting points for 1/4″-20 and M6 x 1.0 threads. A power supply is not included.

Wireless network connectivity between all linked transmitters and access points
Enables real-time wireless remote control of up to 24 transmitters per access point
ShowLink offers ability to adjust gain, change frequencies, mute signals, and more
True Diversity antenna scheme maintains a robust link in the 2.4 GHz frequency range
Automatic channel selection scans the 2.4 GHz range for the best channel
Easy transmitter authentication, recognizes linked transmitters upon IR sync
Provides coverage area approximately the same as the transmitter’s range
Automatic hand-offs between multiple access points extend operating range
Automatic frequency agility moves the network to the best available channel if signal degrades
Compatible with Axient Digital ADX series and Axient analog systems
Receives power via Power over Ethernet (PoE) network connection or from an external power supply (available separately)

Antennas
2 x Omnidirectional 2.4 GHz
Capacity
24 Axient ShowLink transmitters (AXT or ADX models)
Network Type
IEEE 802.15.4
Frequency Range
2.40 to 2.4835 GHz (16 channels)
RF Output Power
10 dBm ERP / 20 dBm ERP
Working Range
500 to 1600′ / 150 to 500 m
Antenna Connector
2 x SMA
Antenna Impedance
50 Ohms
RF Sensitivity
-106 dBm, typical (integrated antenna)
Network Interface
Ethernet 10/100 Mb/s
Network Addressing Capability
DHCP or manual IP address
Mounting
WA371 microphone clip or 1/4″-20 thread mount
Power Requirement
Power over Ethernet (PoE) Class 1: 36 to 57 VDC/VAC
External Power Supply: 15 VDC, 600 mA, double insulated
Certifications
WEEE Directive 2002/96/EC, as amended by 2008/34/EC
RoHS Directive 2011/65/EU
Housing
Extruded aluminum
Protection Rating
IPX3
Operating Temperature
0 to 140°F / -18 to 60°C
Storage Temperature
-20 to 165°F / -29 to 74°C
Dimensions
7.4 x 4.0 x 1.8″ / 19.0 x 10.2 x 4.7 cm without antennas
Weight
16.3 oz / 464 g without antennas